- Description
- Tech Data
- Foto
Brushing Machines
The sturdy construction of our machines is the key to high production performance with outstanding surface quality for the brushing process.
Machines appropriate for both, sheet and coil lines.
Demis Machines
Swiss precision
Welded modular construction for a vibration reduced production
Hardened Billy Rolls
High speed brushing up to 80m/min Easy exchange of the brushing rolls within a short time
Main Characteristics
- Highest production velocities.
- Optimised dust extraction, air usage and velocity.
- Reduced air loss by ideal exhaust hatches.
- Insignificant quantity of back dust on grinded surfaces.
- Impression roller with special wolfram-coating.
- Fast and simple system for changing the brushing rollers.
- Integrated pull off-mechanism to each brushing unit (as option).
- Dynamic wheel balancing of the thorn eliminates vibrations and allows high production velocities.
- The modular system allows different re-fitting of existing machines even at a later point in time.
- Oscillation up to 700 strokes and adjustable from 0 to 5mm (resp. 0 to 7mm). Now also available as electrically adjustable for setting changes without a machine stop (as option).
The electric oscillator
It allows a change of the adjusting range (from 0 to 7mm) also during the operation of the machine. Downtime due to changeover works is therefore avoided. The results received from different applications are positive in all areas.
Brushing Machines Technical Data
| TYPE | SB | SB | |
| Head | 160 | 200 | |
| Working Width | 1600 mm | 2000 mm | |
| Working Height of the machine |
|
900 mm |
900 +/- 30 mm |
| Feeding range, stageless adjustment | 5 - 80 m/min | 5 - 80 m/min | |
| Brushing speed, stageless adjustment | 5 - 25 m/sec | 5 - 25 m/sec | |
| Rolls | |||
| Brush shaft collector | Ø 160 | Ø 160 | |
| Transport rolls rubberized, oil repellent, shore hardness | 62 Shore A | 62 Shore A | |
| Powered billy rolls, wear resistant surface hardness | 0 - 700 strokes/min | 0 - 700 strokes/min | |
| Oscilation length, adjustment ( electronic ) | Tungstenit | Tungstenit | |
| Brushes | |||
| Width: (Material width + 25mm each) max. | 1'650 mm | 2'050 mm | |
| Brushes standard outside diameter | Ø 400 mm | Ø 400 mm | |
| Brushes outside diameter – Optional | Ø 450 mm | Ø 450 mm | |
| Brushes inside diameter | Ø 250 mm | Ø 250 mm | |
| Oscillation | |||
| Oscillation | 0 - 700 Strokes/min | 0 - 700 Strokes/min | |
| Oscillation length, adjustable | 0 – 5 (7) mm | 0 – 5 (7) mm | |
| Motors | |||
| Brushing motor; selectable | 30 / 37 kW | 37 / 45 kW | |
| Feed motor with frequency variator in accordance with line configurations | 5.5 kW / Head | 5.5 kW / Head | |
| Weight of the Machine | |||
| Weight per head | 6400 kg | 7100 kg | |
| Dust Extraction System | |||
| Required suction air of the machine per head | 5500 m3/h | '500 m3/h | |
| Air speed, measured at the connection ports | 2200 Pa | '200 Pa |
Brushing Machines Fotos
